Advances in the effect of surface treatment on the bonding strength between pure titanium and porcelain

doi:10.3877/cma.j.issn.1674-1366.2012.04.015

Abstract

Abstract:

Pure titanium has become popular in oral restorations because of its excellent biocompatibility， low cost high strength and corrosion resistance. However， the tendency of hightemperature oxidation of titanium and the discrepency of thermal expansion coefficients between titanium and porcelain limit its use in PFM restorations. Therefore， the research to enhance the bond strength between pure titanium and porcelain has attracted much attention recently. This paper presents a review on the research of the surface modification of titanium.

Key words: Pure titanium, Bond strength, Surface modification, Sandblasting, Preoxidation, Coating, Bonding agent

Yi-ping ZHANG, Jian-tao YE. Advances in the effect of surface treatment on the bonding strength between pure titanium and porcelain[J]. Chinese Journal of Stomatological Research(Electronic Edition), 2012, 6(04): 382-385.

/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://zhkqyxyjzz.cma-cmc.com.cn/EN/10.3877/cma.j.issn.1674-1366.2012.04.015

https://zhkqyxyjzz.cma-cmc.com.cn/EN/Y2012/V6/I04/382

References 35

1	Al Hussaini I， Al Wazzan KA. Effect of surface treatment on bond strength of low-fusing porcelain to commercially pure titanium. J Prosthet Dent， 2005，94（4）：350-356.
2	Suansuwan N， Swain MV. Adhesion of porcelain to titanium and a titanium alloy. J Dent， 2003，31（7）：509-518.
3	Wang RR， Meyers E， Katz JL. Scanning acoustic microscopy study of titanium-ceramic interface of dental restorations.Biomed Mater Res， 1998，42（4）：508-516.
4	Sadeq A， Cai Z， Woody RD， et al. Effects of interfacial variables on ceramic adherence to cast and machined commercially pure titanium. J Prosthet Dent， 2003，90（1）：10-17.
5	叶剑涛，张翠翠，常少海，等. 含钛的镍铬合金和纯钛金瓷结合强度的研究. 临床口腔医学杂志， 2010，26（8）：460-463.
6	Könönen M， Kivilahti J. Fusing of dental ceramics to titanium.J Dent Res， 2001，80（3）：848-854.
7	王晓洁，郭天文，张玉梅，等. 喷砂粒度对钛/瓷结合强度影响的研究. 临床口腔医学杂志， 2007，23（3）：162-164.
8	Wang CS， Chen KK， Tajima K， et al. Effects of sandblasting media and steam cleaning on bond strength of titaniumporcelain. Dent Mater J， 2010，29（4）：381-391.
9	Gilbert JL， Covey DA， Lautenschlager EP. Bond characteristics of porcelain fused to milled titanium. Dent Mater， 1994，10（2）：134-140.
10	Oshida Y， Reyes MJ. Titanium-porcelain system. PartⅣ： Some mechanistic considerations on porcelain bond strengths. Biomed Mater Eng， 2001，11（2）：137-142.
11	程静涛，郭天文. 喷砂对钛铸件表面结构的影响. 中华口腔医学杂志， 2000，35（4）：315.
12	王晓洁，郭天文，张玉梅，等. 钛表面预氧处理对钛瓷结合强度的影响. 口腔医学， 2009，29（4）：177-179.
13	张翠翠，叶剑涛，朱峰，等. 除气和预氧化对纯钛金瓷结合强度的影响. 现代口腔医学杂志， 2010，24（6）：429-432.
14	Adachi M， Mackert JR Jr， Parry EE， et al. Oxide adherence and porcelain bonding to titanium and Ti-6Al-4V alloy. J Dent Res， 1990，69（6）：1230-1235.
15	Yan M， Kao CT， Ye JS， et al. Effect of preoxidation of titanium on the titanium-ceramic bonding. Surf Coat Technol， 2007，202（2）：288-293.
16	孙晟宇，张春宝，张少锋. 不同预处理对切削纯钛与瓷结合强度的影响. 牙体牙髓牙周病学杂志， 2008，18（12）：687-689.
17	刘洋，周立冬，傅敏杰，等. 钛金属表面不同预处理对钛瓷结合强度的影响. 中华老年口腔医学杂志， 2003，1（3）：156-158.
18	吕武龙，张振庭，任卫红，等. 不同厚度溶胶-凝胶法二氧化硅薄膜对钛瓷结合强度的影响. 口腔颌面修复学杂志， 2010，11（3）：135-138.
19	周淑，张文艳，光寒冰，等. 磁控溅射氮化锆涂层对钛-低熔瓷结合强度的影响. 中华口腔医学杂志， 2009，44（4）：236-239.
20	王舒舒，吴湘君，光寒冰，等. 不同氮分压下磁控溅射ZrN 对钛/瓷结合的影响. 稀有金属材料与工程， 2011，40（5）：802-806.
21	张惠，郭天文，宋忠孝. 磁控溅射ZrSiN 涂层对钛瓷结合强度的影响. 稀有金属材料与工程， 2006，35（4）：593-595.
22	Bienia J， Surowska B， Stoch A， et al. The influence of SiO₂ and SiO₂-TiO₂ intermediate coatings on bond strength of titanium and Ti6Al4V alloy to dental porcelain. Dent Mater，2009，25（9）：1128-1135.
23	周淑，王瑜，章非敏，光寒冰. 纳米硅涂层对钛瓷结合强度的影响. 华西口腔医学杂志， 2009，27（3）：276-279.
24	Zhang Z， Zhang P， Guo L， et al. Effect of TiO₂-SiO₂ sol-gel coating on the cpTi-porcelain bond strength. Materials Letters，2011，65（7）：1082-1085.
25	Park S， Kim Y， Lim H， et al. Gold and titanium nitride coatings on cast and machined commercially pure titanium to improve titanium-porcelain adhesion. Surf Coat Technol， 2009，203（20-21）：3243-3249.
26	Lim HP， Kim JH， Lee KM， et al. Fracture load of titanium crowns coated with gold or titanium nitride and bonded to lowfusing porcelain. J Prosthet Dent， 2011，105（3）：164-170.
27	Elsaka SE， Hamouda IM， Elewady YA， et al. Influence of chromium interlayer on the adhesion of porcelain to machined titanium as determined by the strain energy release rate. J Dent， 2010，38（8）：648-654.
28	Wang RR， Fung KK. Oxidation behavior of surface-modified titanium for titanium-ceramic restorations. J Prosthet Dent，1997，77（4）：423-434.
29	Okazaki M， Wang X， Toguchi MS， et al. Improvement of bond strength in metal-ceramic systems using a gold intermediate layer. Dent Mater J， 1998，17（3）：163-173.
30	Wu Y， Moser JB， Jameson LM， et al. The effect of oxidation heat treatment of porcelain bond strength in selected base metal alloys. J Prosthet Dent， 1991，66（4）：439-444.
31	Chakmakchi M， Eliades G， Zinelis S. Bonding agents of low fusing cpTi porcelains： Elemental and morphological characterization. J Prosthodont Res， 2009，53（4）：166-171.
32	王晓洁，郭天文，张玉梅. 粘结瓷对钛/瓷结合强度的影响. 临床口腔医学杂志， 2011，27（8）：464-466.
33	谈飞，张玉梅，张若冰，等. 3 种粘接瓷对钛瓷结合强度的影响. 实用口腔医学杂志， 2010，26（2）：160-164.
34	Troia MG Jr， Henriques GE， Mesquita MF， et al. The effect of surface modifications on titanium to enable titanium-porcelain bonding. Dent Mater， 2008，24（1）：28-33.
35	Reyes MJ， Oshida Y， Andres CJ， et al. Titanium porcelain system. Part Ⅲ： effects of surface modification on bond strengths. Biomed Mater Eng， 2001，11（2）：117-136.

[1]	Haiyan Wang, Dongxue Zhang, Shengping Su, Tong Jiang. Curative effect of photodynamic therapy combined with subgingival sandblasting on the change of microflora distribution of gingival crevicular fluid of patients with peri-implantitis [J]. Chinese Journal of Experimental and Clinical Infectious Diseases(Electronic Edition), 2022, 16(06): 391-403.
[2]	Tian Chen, Xin Li, Kaizheng Liu, Yongqiang Deng. Research progress in bone osseointegration for implant dentistry [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2024, 18(03): 200-205.
[3]	Feifei Pang, Junjie Liu, Zihang Yu, Xiaojie Wu, Xinyu Zhang, Desong Zhan, Jiale Fu. Effect of different surface treatments on the bonding performance between polyetheretherketone and composite resin [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2022, 16(02): 74-81.
[4]	Yuqing Bian, Yidan Ma, Dongyue Dai, Ping Su, Mengqi Jia, Desong Zhan, Jiale Fu. Effect of tannic acid with different concentrations on bond strength under different etching modes [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2020, 14(04): 221-227.
[5]	Xiaoyuan Yan, Yue Chen, Ke Li, Shize Zheng, Desong Zhan, Jiale Fu. Research progress of crosslinkers in inhibiting matrix metalloproteinases and improving bonding durability [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2019, 13(05): 311-316.
[6]	Quan Luo, Jing Xia, Jieyin Li, Shiyao Lin, Yan Qu, Jiantao Ye, Juankun Liao. Comparison of the bond strength of selective laser melting and cast Cobalt-Chromium alloys to porcelain [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2017, 11(04): 211-217.
[7]	Jiayun Xu, Feilong Deng, Xiumei Zhuang, Jianglin Ou-Yang, Yun Liu, Jing Wang, Xiachen Li. The influence of different hybrid micro/nano hierarchical titanium topographies on osteoblast biological functions [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2015, 09(06): 461-469.
[8]	Ziru Huang, Hua Zou, Muming Hou, Huan Xu, Jianxin Ji, Yi Chen. Effect of powder/liquid ratio variation of resin-modified glass ionomer cement on bonding brackets [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2015, 09(04): 301-304.
[9]	Huawei He, Dongxiang Zheng. A preliminary study on relationship between the denture material, masticatory performance, and patient satisfaction [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2015, 09(03): 200-204.
[10]	Jiantao Ye, Bohua Li, Jieyin Li, Xiqian Wang, Lu Wang, Xiuhua Ye. Effects of two sizes of sandblasting on the metal-ceramic bonding strength of palladium-silver alloy [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2015, 09(01): 37-43.
[11]	Yujie Wen, Dahong Huang, Zhuhong Wang. Effect of immediate dentin sealing on preventive treatment of dentin hypersensitivity [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2014, 8(05): 398-400.
[12]	Wenhao ZHANG, Guo-bin LIANG, Yan LI. The bond strength of the dentin interface after desensitizing and etching treatment [J]. Chinese Journal of Stomatological Research(Electronic Edition), 2012, 6(05): 426-430.
[13]	Daocheng Fang, Lixin Chen, Yuanyuan Hu. Research progress on ureteral stent crusts [J]. Chinese Journal of Endourology(Electronic Edition), 2024, 18(04): 402-405.
[14]	Lin Duan, Yanyan He, Tianxiao Li, Song Chen, Yingkun He, Haigang Wu. Progress in surface modification of nitinol stent [J]. Chinese Journal of Interventional Radiology(Electronic Edition), 2022, 10(01): 83-87.
[15]	Chenyi Jin, Guochao Xu. The effects of glycine subgingival sandblasting on the treatment of chronic periodontitis in elderly patients with coronary heart disease [J]. Chinese Journal of Geriatrics Research(Electronic Edition), 2019, 06(01): 26-29.

Please choose a citation manager

Content to export