[1] |
Lombardo GH, Nishioka RS, Souza RO,et al. Influence of surface treatment on the shear bond strength of ceramics fused to cobalt-chromium[J]. J Prosthodont,2010,19(2):103-111.
|
[2] |
Oliveira de Vasconcellos LG, Silva LH, Reis de Vasconcellos LM,et al. Effect of airborne-particle abrasion and mechanico-thermal cycling on the flexural strength of glass ceramic fused to gold or cobalt-chromium alloy[J]. J Prosthodont,2011,20(7):553-560.
|
[3] |
Schneider R, de Goes MF, Henrigues GE,et al. Tensile bond strength of dual curing resin-based cements to commercially pure titanium[J]. Dent Mater,2007,23(1):81-87.
|
[4] |
闫召民,郭天文,李左臣,等.钛及钛合金与SOLIDEX光固化冠桥树脂粘结性能的研究[J].实用口腔医学杂志,2000,16(1):40-42.
|
[5] |
ISO 9693:1999(E). Metal-ceramic dental restorative systems[S]. Switzer land,International Organization for Standardization,1999.
|
[6] |
May KB, Van Putten MC, Bow DA,et al. 4-META polymethyl methacrylate shear bond strength to titanium[J]. Oper Dent,1997,22(1):37-40.
|
[7] |
Lenz J, Schwarz S, Schwickerath H,et al. Bond strength of metal-ceramic systems in three-point flexure bond test[J]. J Appl Biomater,1995,6(1):55-64.
|
[8] |
Lenz J, Kessel S. Thermal stresses in metal-ceramic specimens for the ISO crack initiation test(three-point flexure bond test)[J]. Dent Mater,1998,14(4):277-280.
|
[9] |
Zhang CC, Ye JT, Zhang YP,et al. Effect of titanium preoxidation on wrought pure titanium to ceramic bond strength[J]. J Prosthet Dent,2013,109(2):106-112.
|
[10] |
Wu Y, Moser JB, Jameson LM,et al. The effect of oxidation heat treatment of porcelain bond strength in selected base metal alloys [J]. J Prosthet Dent,1991,66(4):439-444.
|
[11] |
Joias RM, Tango RN, Junho de Araujo JE,et al. Shear bond strength of a ceramic to Co-Cr alloys[J]. J Prosthet Dent,2008,99(1):54-59.
|
[12] |
Serra-Prat J, Cano-Batalla J, Cabratosa-Termes J. Adhesion of dental porcelain to cast,milled,and laser-sintered cobalt-chromium alloys:shear bond strength and sensitivity to thermocycling[J]. J Prosthet Dent,2014,112(3):600-605.
|
[13] |
Fernandes Neto AJ, Panzeri H, Neves FD,et al. Bond strength of three dental porcelains to Ni-Cr and Co-Cr-Ti alloys[J]. Braz Dent J,2006,17(1):24-28.
|
[14] |
Pretti M, Hilgert E, Bottino MA,et al. Evaluation of the shear bond strength of the union between two CoCr-alloys and a dental ceramic[J]. J Appl Oral Sci,2004,12(4):280-284.
|
[15] |
Ciftçi Y, Canay S, Hersek N. Shear bond strength evaluation of different veneering systems on Ni-Cr alloys[J]. J Prosthodont,2007,16(1):31-36.
|
[16] |
Xiang N, Xin XZ, Chen J,et al. Metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting[J]. J Dent,2012,40(6):453-457.
|
[17] |
Vojdani M, Shaghaghian S, Khaledi A,et al. The effect of thermal and mechanical cycling on bond strength of a ceramic to nickel-chromium(Ni-Cr)and cobalt-chromium(Co-Cr)alloys [J]. Indian J Dent Res,2012,23(4):509-513.
|
[18] |
Papadopoulos T, Tsetsekou A, Eliades G. Effect of aluminium oxide sandblasting on cast commercially pure titanium surfaces [J]. Eur J Prosthodont Restor Dent,1999,7(1):15-21.
|
[19] |
王晓洁,郭天文,张玉梅,等.钛表面不同喷砂条件处理对钛/瓷结合强度的影响[J].现代口腔医学杂志,2007,21(4):389-391.
|
[20] |
Tolga K, Murat K, Çağrı U,et al. Effect of different air-abrasion particles on metal-ceramic bond strength[J]. J Dent Sci,2011,6(3):140-146.
|
[21] |
Wang CS, Chen KK, Tajima K,et al. Effects of sandblasting media and steam cleaning on bond strength of titanium-porcelain [J]. Dent Mater J,2010,29(4):381-391.
|
[22] |
李冬梅,郭天文,马楚凡,等.不同喷砂粒度的预处理对钛与不同瓷聚合体粘接强度的影响[J].实用口腔医学杂志,2008,24(3):357-360.
|
[23] |
文志红,杜传诗,郑弟泽,等.不同喷砂粒度对金-瓷结合强度的影响[J].中华口腔医学杂志,1994,29(4):229-231.
|
[24] |
杨晖,潘少明.基体表面粗糙度对涂层结合强度的影响[J].热加工工艺,2008,37(15):118-121.
|
[25] |
Reyes MJ, Oshida Y, Andres CJ,et al. Titanium-porcelain system. Part Ⅲ:effects of surface modification on bond strengths [J]. Biomed Mater Eng,2001,11(2):117-136.
|
[26] |
Mukai M, Fukui H, Hasegawa J. Relationship between sandblasting and composite resin-alloy bond strength by a silica coating[J]. J Prosthet Dent,1995,74(2):151-155.
|
[27] |
王晓洁,郭天文,张玉梅,等.喷砂粒度对钛/瓷结合强度影响的研究[J].临床口腔医学杂志,2007,23(3):162-164.
|
[28] |
Yao L, Peng C, Wu J. Wettability and bond strength between leucite-reinforced dental porcelains and Co-Cr alloy[J]. J Prosthet Dent,2013,110(6):515-520.
|
[29] |
Wagner WC, Asgar K, Bigelow WC,et al. Effect of interfacial variables on metal-porcelain bonding[J]. J Biomed Mater Res,1993,27(4):531-537.
|
[30] |
Johnson T, van Noort R, Stokes CW. Surface analysis of porcelain fused to metal systems[J]. Dent Mater,2006,22(4):330-337.
|