| [1] |
Lin CY, Lin D, He WH. Impacts of 3 different endodontic access cavity designs on dentin removal and point of entry in 3-dimensional digital models[J]. J Endod， 2020, 46(4):524-530. DOI： 10.1016/j.joen.2020.01.002.
|
| [2] |
Zhang Y, Liu Y, She Y，et al. The effect of endodontic access cavities on fracture resistance of first maxillary molar using the extended finite element method[J]. J Endod， 2019, 45(3):316-321. DOI： 10.1016/j.joen.2018.12.006.
|
| [3] |
Silva EJNL, Rover G, Belladonna FG，et al. Impact of contracted endodontic cavities on fracture resistance of endodontically treated teeth：A systematic review of in vitro studies[J]. Clin Oral Investig， 2018, 22(1):109-118. DOI： 10.1007/s00784-017-2268-y.
|
| [4] |
Ibrahim AM, Richards LC, Berekally TL. Effect of remaining tooth structure on the fracture resistance of endodontically-treated maxillary premolars：An in vitro study[J]. J Prosthet Dent， 2016, 115(3):290-295. DOI： 10.1016/j.prosdent.2015.08.013.
|
| [5] |
Corsentino G, Pedullà E, Castelli L，et al. Influence of access cavity preparation and remaining tooth substance on fracture strength of endodontically treated teeth[J]. J Endod， 2018, 44(9):1416-1421. DOI： 10.1016/j.joen.2018.05.012.
|
| [6] |
Reeh ES, Messer HH, Douglas WH. Reduction in tooth stiffness as a result of endodontic and restorative procedures[J]. J Endod， 1989, 15(11):512-516. DOI： 10.1016/s0099-2399(89)80191-8.
|
| [7] |
Vianna ALSV, Prado CJD, Bicalho AA，et al. Effect of cavity preparation design and ceramic type on the stress distribution，strain and fracture resistance of CAD/CAM onlays in molars[J]. J Appl Oral Sci， 2018, 26:e20180004. DOI： 10.1590/1678-7757-2018-0004.
|
| [8] |
Vertolli TJ, Martinsen BD, Hanson CM，et al. Effect of deep margin elevation on CAD/CAM-fabricated ceramic inlays[J]. Oper Dent， 2020, 45(6):608-617. DOI： 10.2341/18-315-L.
|
| [9] |
Hayes A, Duvall N, Wajdowicz M，et al. Effect of endocrown pulp chamber extension depth on molar fracture resistance[J]. Oper Dent， 2017, 42(3):327-334. DOI： 10.2341/16-097-L.
|
| [10] |
Kassis C, Khoury P, Mehanna CZ，et al. Effect of inlays，onlays and endocrown cavity design preparation on fracture resistance and fracture mode of endodontically treated teeth：An in vitro study[J]. J Prosthodont， 2021, 30(7):625-631. DOI： 10.1111/jopr.13294.
|
| [11] |
Einhorn M, DuVall N, Wajdowicz M，et al. Preparation ferrule design effect on endocrown failure resistance[J]. J Prosthodont， 2019, 28(1):e237-e242. DOI： 10.1111/jopr.12671.
|
| [12] |
Wake R, Buck R, DuVall N，et al. Effect of molar preparation axial height on retention of adhesively-luted CAD-CAM ceramic crowns[J]. J Adhes Dent， 2019, 21(6):545-550. DOI： 10.3290/j.jad.a43651.
|
| [13] |
Souza RO, Özcan M, Pavanelli CA，et al. Marginal and internal discrepancies related to margin design of ceramic crowns fabricated by a CAD/CAM system[J]. J Prosthodont， 2012, 21(2):94-100. DOI： 10.1111/j.1532-849X.2011.00793.x.
|
| [14] |
Memari Y, Mohajerfar M, Armin A，et al. Marginal adaptation of CAD/CAM all-ceramic crowns made by different impression methods：A literature review[J]. J Prosthodont， 2019, 28(2):e536-e544. DOI： 10.1111/jopr.12800.
|
| [15] |
Hassan LA, Goo CL. Effect of cement space on marginal discrepancy and retention of CAD/CAM crown[J]. Dent Mater J， 2021, 40(5):1189-1195. DOI： 10.4012/dmj.2020-408.
|
| [16] |
Pang J, Feng C, Zhu X，et al. Fracture behaviors of maxillary central incisors with flared root canals restored with CAD/CAM integrated glass fiber post-and-core[J]. Dent Mater J， 2019, 38(1):114-119. DOI： 10.4012/dmj.2017-394.
|
| [17] |
Nodehi D, Moraditalab A, Shafiee S，et al. Fracture resistance of endodontically treated premolars reconstructed by traditional casting and CAD-CAM milling post and cores[J]. Int J Dent， 2022:6736303. DOI： 10.1155/2022/6736303.
|
| [18] |
Perucelli F, Goulart da Costa R, Machado de Souza E，et al. Effect of half-digital workflows on the adaptation of custom CAD-CAM composite post-and-cores[J]. J Prosthet Dent， 2021, 126(6):756-762. DOI： 10.1016/j.prosdent.2020.08.014.
|
| [19] |
Hendi AR, Moharrami M, Siadat H，et al. The effect of conventional，half-digital，and full-digital fabrication techniques on the retention and apical gap of post and core restorations[J]. J Prosthet Dent， 2019, 121(2):364.e1-364.e6. DOI： 10.1016/j.prosdent.2018.09.014.
|
| [20] |
Kanduti D, Korat L, Kosec T，et al. Comparison between accuracy of posts fabricated using a digital CAD/CAM technique and a conventional direct technique[J]. Int J Prosthodont， 2021, 34(2):212-220. DOI： 10.11607/ijp.6502.
|
| [21] |
Al-Qarni FD. Customized post and cores fabricated with CAD/CAM technology：A literature review[J]. Int J Gen Med， 2022, 15:4771-4779. DOI： 10.2147/IJGM.S365296.
|
| [22] |
Moustapha G, AlShwaimi E, Silwadi M，et al. Marginal and internal fit of CAD/CAM fiber post and cores[J]. Int J Comput Dent，2019,22(1):45-53.
|
| [23] |
Fathi A, Ebadian B, Dezaki SN，et al. An umbrella review of systematic reviews and meta-analyses evaluating the success rate of prosthetic restorations on endodontically treated teeth[J]. Int J Dent， 2022:4748291. DOI： 10.1155/2022/4748291.
|
| [24] |
Jurado CA, Pinedo F, Trevino DAC，et al. CAD/CAM lithium disilicate ceramic crowns：Effect of occlusal thickness on fracture resistance and fractographic analysis[J]. Dent Mater J， 2022, 41(5):705-709. DOI： 10.4012/dmj.2022-018.
|
| [25] |
Tribst JP, Dal Piva AO, Madruga CF，et al. The impact of restorative material and ceramic thickness on CAD/CAM endocrowns[J]. J Clin Exp Dent， 2019, 11(11):e969-e977. DOI： 10.4317/jced.56002.
|
| [26] |
Belli R, Petschelt A, Hofner B，et al. Fracture rates and lifetime estimations of CAD/CAM all-ceramic restorations[J]. J Dent Res， 2016, 95(1):67-73. DOI： 10.1177/0022034515608187.
|
| [27] |
Schestatsky R, Zucuni CP, Venturini AB，et al. CAD-CAM milled versus pressed lithium-disilicate monolithic crowns adhesively cemented after distinct surface treatments：Fatigue performance and ceramic surface characteristics[J]. J Mech Behav Biomed Mater， 2019, 94:144-154. DOI： 10.1016/j.jmbbm.2019.03.005.
|
| [28] |
Dapieve KS, Aragonez GC, Prochnow C，et al. Different etching times of a one-step ceramic primer：Effect on the resin bond strength durability to a CAD/CAM lithium-disilicate glass-ceramic[J]. J Adhes Dent， 2021, 23(2):133-143. DOI： 10.3290/j.jad.b1079573.
|
| [29] |
Czigola A, Abram E, Kovacs ZI，et al. Effects of substrate，ceramic thickness，translucency，and cement shade on the color of CAD/CAM lithium-disilicate crowns[J]. J Esthet Restor Dent， 2019, 31(5):457-464. DOI： 10.1111/jerd.12470.
|
| [30] |
Fabian Fonzar R, Goracci C, Carrabba M，et al. Influence of acid concentration and etching time on composite cement adhesion to lithium-silicate glass ceramics[J]. J Adhes Dent， 2020, 22(2):175-182. DOI： 10.3290/j.jad.a44282.
|
| [31] |
Rigolin FJ, Negreiros WM, Giannini M，et al. Effects of sandblasting and hydrofluoric acid etching on surface topography，flexural strength，modulus and bond strength of composite cement to ceramics[J]. J Adhes Dent， 2021, 23(2):113-119. DOI： 10.3290/j.jad.b1079547.
|
| [32] |
Sulaiman TA. Materials in digital dentistry—A review[J]. J Esthet Restor Dent， 2020, 32(2):171-181. DOI： 10.1111/jerd.12566.
|
| [33] |
Rosentritt M, Preis V, Behr M，et al. In-vitro performance of CAD/CAM crowns with insufficient preparation design[J]. J Mech Behav Biomed Mater， 2019, 90:269-274. DOI： 10.1016/j.jmbbm.2018.10.002.
|
| [34] |
Hampe R, Theelke B, Lümkemann N，et al. Fracture toughness analysis of ceramic and resin composite CAD/CAM material[J]. Oper Dent， 2019, 44(4):E190-E201. DOI： 10.2341/18-161-L.
|
| [35] |
Zhang L, Hou XX, Aishan M，et al. A 3-year clinical evaluation of endodontically treated posterior teeth restored with resin nanoceramic computer-aided design/computer-aided manufacture （CAD/CAM）-fabricated partial crowns[J]. Med Sci Monit， 2022, 28:e937331. DOI： 10.12659/MSM.937331.
|
| [36] |
Scaminaci Russo D, Cinelli F, Sarti C，et al. Adhesion to zirconia：A systematic review of current conditioning methods and bonding materials[J]. Dent J （Basel）， 2019, 7(3):74. DOI： 10.3390/dj7030074.
|
| [37] |
Sahebi M, Ghodsi S, Berahman P，et al. Comparison of retention and fracture load of endocrowns made from zirconia and zirconium lithium silicate after aging：An in vitro study[J]. BMC Oral Health， 2022, 22(1):41. DOI： 10.1186/s12903-022-02072-x.
|
| [38] |
Ioannidis A, Bomze D, Hämmerle CHF，et al. Load-bearing capacity of CAD/CAM 3D-printed zirconia，CAD/CAM milled zirconia，and heat-pressed lithium disilicate ultra-thin occlusal veneers on molars[J]. Dent Mater， 2020, 36(4):e109-e116. DOI： 10.1016/j.dental.2020.01.016.
|
| [39] |
Zimmermann M, Ender A, Mehl A. Influence of CAD/CAM fabrication and sintering procedures on the fracture load of full-contour monolithic zirconia crowns as a function of material thickness[J]. Oper Dent， 2020, 45(2):219-226. DOI： 10.2341/19-086-L.
|