Research progress of bulk-fill resin composites in microleakage

doi:10.3877/cma.j.issn.1674-1366.2021.05.011

Abstract

Abstract:

Microleakage between the filling material and the tooth interface is considered as the most important risk factor responsible for the failure of the restoration. Bulk-fill resin composites (BFRCs) are widely used in the treatment of dental caries because they have the ability to build up increments in single filling, reduce polymerization shrinkage and increase fracture resistance of treated teeth. In this paper, the related research progress on microleakage of BFRCs is reviewed, and the classification and performance characteristics of BFRCs are summarized. The capability of BFRCs and traditional resin against microleakage in filling different types of cavities is compared. The causes of the differences of microleakage in using different kinds of BFRCs are discussed, and the factors causing microleakage are generalized in order to provide better choices for clinical treatment.

Key words: Composite resins, Polymerization, Shrinkage, Viscosity, Microleakage

Ling Ren, Weizhen Liu, Xiaoting Wang, Lina Shao. Research progress of bulk-fill resin composites in microleakage[J]. Chinese Journal of Stomatological Research(Electronic Edition), 2021, 15(05): 314-319.

/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://zhkqyxyjzz.cma-cmc.com.cn/EN/10.3877/cma.j.issn.1674-1366.2021.05.011

https://zhkqyxyjzz.cma-cmc.com.cn/EN/Y2021/V15/I05/314

References 60

[1]	Bollu IP, Hari A, Thumu J，et al. Comparative evaluation of microleakage between nano-ionomer，giomer and resin modified glass ionomer cement in class V cavities-CLSM study[J]. J Clin Diagn Res，2016，10（5）：ZC66-ZC70. DOI：10.7860/JCDR/2016/18730.7798.
[2]	Hafez MA, Elkateb M, El-Shabrawy S，et al. Microleakage valuation of composite restorations following papain-based chemo-mechanical caries removal in primary teeth[J]. J Clin Pediatr Dent，2017，41（1）：53-61. DOI：10.17796/1053-4628-41.1.53.
[3]	Kimyai S, Pournaghi-Azar F, Daneshpooy M，et al. Effect of two prophylaxis methods on marginal gap of Cl Vresin-modified glass-ionomer restorations[J]. J Dent Res Dent Clin Dent Prospects，2016，10（1）：23-29. DOI：10.15171/joddd.2016.004.
[4]	Chesterman J, Jowett A, Gallacher A，et al. Bulk-fill resin-based composite restorative materials：A review[J]. Br Dent J，2017，222（5）：337-344. DOI：10.1038/sj.bdj.2017.214.
[5]	Politi I, McHugh LEJ, Al-Fodeh RS，et al. Modification of the restoration protocol for resin-based composite（RBC）restoratives （conventional and bulk fill）on cuspal movement and microleakage score in molar teeth[J]. Dent Mater，2018，34（9）：1271-1277. DOI：10.1016/j.dental.2018.05.010.
[6]	Rengo C, Spagnuolo G, Ametrano G，et al. Marginal leakage of bulk fill composites in class Ⅱ restorations：A microCT and digital microscope analysis[J]. Int J Adhesion Adhesives，2015，60：123-129. DOI：10.1016/j.ijadhadh.2015.04.007.
[7]	Giachetti L, Scaminaci Russo D, Bambi C，et al. A review of polymerization shrinkage stress：Current techniques for posterior direct resin restorations[J]. J Contemp Dent Pract，2006，7（4）：79-88.
[8]	Ilie N, Hickel R. Resin composite restorative materials[J]. Aust Dent J，2011，56（Suppl 1）：59-66. DOI：10.1111/j.1834-7819.2010.01296.x.
[9]	陈智，张磊，赵小娥.大块充填树脂在牙体修复中的应用与研究进展[J].口腔疾病防治，2017，25（4）：205-210. DOI：10.12016/j.issn.2096-1456.2017.04.001.
[10]	Marovic D, Tauböck TT, Attin T，et al. Monomer conversion and shrinkage force kinetics of low-viscosity bulk-fill resin composites[J]. Acta Odontol Scand，2015，73（6）：474-480. DOI：10.3109/00016357.2014.992810.
[11]	Monterubbianesi R, Orsini G, Tosi G，et al. Spectroscopic and mechanical properties of a new generation of bulk fill composites[J]. Front Physiol，2016，7：652. DOI：10.3389/fphys.2016.00652.
[12]	Alshali RZ, Silikas N, Satterthwaite JD. Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals[J]. Dent Mater，2013，29（9）：e213-e217. DOI：10.1016/j.dental.2013.05.011.
[13]	Flury S, Hayoz S, Peutzfeldt A，et al. Depth of cure of resin composites：Is the ISO 4049 method suitable for bulk-fill materials？[J]. Dent Mater，2012，28（5）：521-528. DOI：10.1016/j.dental.2012.02.002.
[14]	Benetti AR, Havndrup-Pedersen C, Honoré D，et al. Bulk-fill resin composites：Polymerization contraction，depth of cure，and gap formation[J]. Oper Dent，2015，40（2）：190-200. DOI：10.2341/13-324-L.
[15]	Daugherty MM, Lien W, Mansell MR，et al. Effect of high-intensity curing lights on the polymerization of bulk-fill composites[J]. Dent Mater，2018，34（10）：1531-1541. DOI：10.1016/j.dental.2018.06.005.
[16]	赵信义.复合树脂的聚合收缩及收缩应力[J].口腔材料器械杂志，2020，29（3）：121-127. DOI：10.11752/j.kqcl.2020.03.01.
[17]	Yokesh CA, Hemalatha P, Muthalagu M，et al. Comparative evaluation of the depth of cure and degree of conversion of two bulk fill flowable composites[J]. J Clin Diagn Res，2017，11（8）：ZC86-ZC89. DOI：10.7860/JCDR/2017/28004.10444.
[18]	Yu P, Yap A, Wang XY. Degree of conversion and polymerization shrinkage of bulk-fill resin-based composites[J]. Oper Dent，2017，42（1）：82-89. DOI：10.2341/16-027-L.
[19]	姜雪，高平，魏茜茜，等.大块充填树脂的研究进展[J].口腔医学，2019，39（1）：89-92. DOI：10.13591/j.cnki.kqyx.2019.01.020.
[20]	Braga RR, Ballester RY, Ferracane JL. Factors involved in the development of polymerization shrinkage stress in resin-composites：A systematic review[J]. Dent Mater，2005，21（10）：962-970. DOI：10.1016/j.dental.2005.04.018.
[21]	El-Damanhoury H, Platt J. Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites[J]. Oper Dent，2014，39（4）：374-382. DOI：10.2341/13-017-L.
[22]	Barabanti N, Preti A, Vano M，et al. Indirect composite restorations luted with two different procedures：A ten years follow up clinical trial[J]. J Clin Exp Dent，2015，7（1）：e54-e59. DOI：10.4317/jced.51604.
[23]	Lassila LV, Nagas E, Vallittu PK，et al. Translucency of flowable bulk-filling composites of various thicknesses[J]. Chin J Dent Res，2012，15（1）：31-35.
[24]	Kalmowicz J, Phebus JG, Owens BM，et al. Microleakage of class Ⅰ and Ⅱ composite resin restorations using a sonic-resin placement system[J]. Oper Dent，2015，40（6）：653-661. DOI：10.2341/15-006-L.
[25]	刘清华，林琪，魏华. 3种树脂充填材料在修复牙体窝洞后其边缘微渗漏的差异[J].医学理论与实践，2020，33（14）：2335-2336. DOI：10.19381/j.issn.1001-7585.2020.14.051.
[26]	尚选，李倜，朱洪光，等. 3种大块后牙充填树脂体外操作时间与微渗漏的对比观察[J].口腔医学，2017，37（3）：237-239. DOI：10.13591/j.cnki.kqyx.2017.03.010.
[27]	Alqudaihi FS, Cook NB, Diefenderfer KE，et al. Comparison of internal adaptation of bulk-fill and increment-fill resin composite materials[J]. Oper Dent，2019，44（1）：E32-E44. DOI：10.2341/17-269-L.
[28]	杜美仪，王宏，刘原宁，等. Sonicfill系统粘接和挠曲强度及对后牙充填边缘密合性影响的研究[J].中华老年口腔医学杂志，2020，18（1）：30-34. DOI：10.19749/j.cn.cjgd.1672-2973.2020.01.008.
[29]	瞿灵丽，徐艳，李璐.不同酸蚀条件下SonicFill^TM超声树脂修复后牙微渗漏的体外研究[J].口腔医学，2017，37（12）：1057-1060，1065. DOI：10.13591/j.cnki.kqyx.2017.12.001.
[30]	管婷婷，陈霞云，陈强，等.树脂直接充填与超瓷嵌体修复牙体缺损的微渗漏比较[J/OL].中华口腔医学研究杂志（电子版），2014，8（3）：203-207. DOI：10.3877/cma.j.issn.1674-1366.2014.03.005.
[31]	高欣，张元，平逸帆，等.大块树脂与常规树脂整体和分层充填后牙Ⅱ类洞边缘微渗漏及固化程度的比较[J].南京医科大学学报（自然科学版），2020，40（10）：1460-1464.
[32]	Ozel E, Tuna EB, Firatli E. The effects of cavity-filling techniques on microleakage in classⅡ resin restorations prepared with Er∶YAG laser and diamond bur：A scanning electron microscopy study[J]. Scanning，2016，38（5）：389-395. DOI：10.1002/sca.21282.
[33]	Swapna MU, Koshy S, Kumar A，et al. Comparing marginal microleakage of three bulk-fill composites in class Ⅱ cavities using confocal microscope：An in vitro study[J]. J Conserv Dent，2015，18（5）：409-413. DOI：10.4103/0972-0707.164058.
[34]	García Marí L, Climent Gil A, LLena Puy C. In vitro evaluation of microleakage in classⅡ composite restorations：High-viscosity bulk-fill vs conventional composites[J]. Dent Mater J，2019，38（5）：721-727. DOI：10.4012/dmj.2018-160.
[35]	王晓荣，姚丽萍. 3种树脂材料修复离体牙Ⅱ类洞的边缘裂隙和微渗漏比较[J].口腔材料器械杂志，2019，28（4）：199-203. DOI：10.11752/j.kqcl.2019.04.03.
[36]	Mosharrafian S, Heidari A, Rahbar P. Microleakage of two bulk fill and one conventional composite in class Ⅱ restorations of primary posterior teeth[J]. J Dent（Tehran），2017，14（3）：123-131.
[37]	Sadeghi M. An in vitro microleakage study of class V cavities restored with a new self-adhesive flowable composite resin versus different flowable materials[J]. Dent Res J（Isfahan），2012，9（4）：460-465.
[38]	林玉红，孙毅，孟磊，等.大块树脂充填楔状缺损微渗漏的体外研究[J].临床口腔医学杂志，2019，35（9）：525-528. DOI：10.3969/j.issn.1003-1634.2019.09.005.
[39]	朱晸，朱亚琴. 3种复合树脂充填Ⅴ类洞的微渗漏比较研究[J].上海口腔医学，2017，26（3）：241-245. DOI：10.19439/j.sjos.2017.03.001.
[40]	Elshazly TM, Bourauel C, Sherief DI，et al. Evaluation of two resin composites having different matrix compositions[J]. Dent J（Basel），2020，8（3）：76. DOI：10.3390/dj8030076.
[41]	Bowman CN, Kloxin CJ. Covalent adaptable networks：Reversible bond structures incorporated in polymer networks[J]. Angew Chem Int Ed Engl，2012，51（18）：4272-4274. DOI：10.1002/anie.201200708.
[42]	Atai M, Ahmadi M, Babanzadeh S，et al. Synthesis，characterization，shrinkage and curing kinetics of a new low-shrinkage urethane dimethacrylate monomer for dental applications[J]. Dent Mater，2007，23（8）：1030-1041. DOI：10.1016/j.dental.2007.03.004.
[43]	钟伟英，李进红. SonicFill超声树脂修复楔状缺损的临床研究[J].临床口腔医学杂志，2019，35（11）：650-653. DOI：10.3969/j.issn.1003-1634.2019.11.003.
[44]	Lokhande NA, Padmai AS, Rathore VPS，et al. Effectiveness of flowable resin composite in reducing microleakage：An in vitro study[J]. J Int Oral Health，2014，6（3）：111-114.
[45]	Chuang SF, Liu JK, Chao CC，et al. Effects of flowable composite lining and operator experience on microleakage and internal voids in class Ⅱ composite restorations[J]. J Prosthet Dent，2001，85（2）：177-183. DOI：10.1067/mpr.2001.113780.
[46]	Braga RR, Hilton TJ, Ferracane JL. Contraction stress of flowable composite materials and their efficacy as stressrelieving layers[J]. J Am Dent Assoc，2003，134（6）：721-728. DOI：10.14219/jada.archive.2003.0258.
[47]	Tomaszewska IM, Kearns JO, Ilie N，et al. Bulk fill restoratives：To cap or not to cap — That is the question？[J]. J Dent，2015，43（3）：309-316. DOI：10.1016/j.jdent.2015.01.010.
[48]	Kim RJY, Kim YJ, Choi NS，et al. Polymerization shrinkage，modulus，and shrinkage stress related to tooth-restoration interfacial debonding in bulk-fill composites[J]. J Dent，2015，43（4）：430-439. DOI：10.1016/j.jdent.2015.02.002.
[49]	Orłowski M, Tarczydło B, Chałas R. Evaluation of marginal integrity of four bulk-fill dental composite materials：In vitro study[J]. Scientific World Journal，2015：701262. DOI：10.1155/2015/701262.
[50]	Di Fiore A, Meneghello R, Savio G，et al. In vitro implant impression accuracy using a new photopolymerizing SDR splinting material[J]. Clin Implant Dent Relat Res，2015，17（Suppl 2）：e721-e729. DOI：10.1111/cid.12321.
[51]	薛晶.大块充填树脂的临床应用影响因素[J].华西口腔医学杂志，2020，38（3）：233-239. DOI：10.7518/hxkq.2020.03.001.
[52]	Gamarra VSS, Borges GA, Júnior LHB，et al. Marginal adaptation and microleakage of a bulk-fill composite resin photopolymerized with different techniques[J]. Odontology，2018，106（1）：56-63. DOI：10.1007/s10266-017-0294-5.
[53]	Segal P, Candotto V, Ben-Amar A，et al. The effect of gingival wall location on the marginal seal of classⅡ restorations prepared with a flowable bulk-fill resin-based composite[J]. J Biol Regul Homeost Agents，2018，32（2）：11-18.
[54]	Santhosh L, Bashetty K, Nadig G. The influence of different composite placement techniques on microleakage in preparations with high C-factor：An in vitro study[J]. J Conserv Dent，2008，11（3）：112-116. DOI：10.4103/0972-0707.45249.
[55]	梁椿怡，朱洪光，魏美荣，等.树脂充填Ⅱ类洞龈壁不同位置微渗漏体外实验[J].潍坊医学院学报，2019，41（6）：443-446. DOI：10.16846/j.issn.1004-3101.2019.06.014.
[56]	Ramic BD, Premovic MT, Stojanac IL，et al. Improved marginal adaptation of composite restorations by using different placement and light polymerization techniques[J]. Am J Dent，2018，31（1）：7-12.
[57]	Agarwal PM, Taneja S, Kumar M. To evaluate and compare the effect of different light-curing modes and different liners on cuspal deflection in premolar teeth restored with bulk filled or incrementally filled composite measured at different time intervals[J]. J Conserv Dent，2017，20（5）：317-321. DOI：10.4103/JCD.JCD_328_16.
[58]	李金恒，朱亚琴. Er∶YAG激光预备及酸蚀处理对复合树脂充填体微渗漏的影响[J].口腔材料器械杂志，2014，23（1）：15-19. DOI：10.11752/j.kqcl.2014.01.03.
[59]	王惠敏，赵增波，陈志宇，等.不同制洞方法及充填材料对乳牙充填体边缘微渗漏的影响[J].现代口腔医学杂志，2020，34（3）：169-171.
[60]	Rueggeberg FA, Caughman WF, Curtis JW Jr，et al. Factors affecting cure at depths within light-activated resin composites[J]. Am J Dent，1993，6（2）：91-95.

Please choose a citation manager

Content to export