| ［1］ |
Eldafrawy M，Nguyen JF，Mainjot AK，et al.A functionally graded PICN material for biomimetic CAD-CAM blocks［J］.J Dent Res，2018，97（12）：1324-1330.DOI：10.1177/002203451 8785364.
|
| ［2］ |
Bona AD，Corazza PH，Zhang Y.Characterization of a polymerinfiltrated ceramic-network material［J］.Dent Mater，2014，30（5）：564-569.DOI：10.1016/j.dental.2014.02.019.
|
| ［3］ |
Coldea A，Swain MV，Thiel N. In vitro strength degradation of dental ceramics and novel PICN material by sharp indentation［J］.J Mech Behav Biomed Mater，2013，26：34-42.DOI：10.1016/j.jmbbm.2013.05.004.
|
| ［4］ |
Hodásová L，Morena AG，Tzanov T，et al.3D-printed polymerinfiltrated ceramic network with antibacterial biobased silver nanoparticles［J］.ACS Appl Bio Mater，2022，5（10）：4803-4813.DOI：10.1021/acsabm.2c00509.
|
| ［5］ |
何三纲.口腔解剖生理学［M］.8 版.北京：人民卫生出版社，2020：244-245.
|
| ［6］ |
Goujat A，Abouelleil H，Colon P，et al.Mechanical properties and internal fit of 4 CAD-CAM block materials［J］.J Prosthet Dent，2018，119（3）：384-389.DOI：10.1016/j.prosdent.2017.03.001.
|
| ［7］ |
Argyrou R，Thompson GA，Cho SH，et al.Edge chipping resistance and flexural strength of polymer infiltrated ceramic network and resin nanoceramic restorative materials ［J］.J Prosthet Dent，2016，116（3）：397-403.DOI：10.1016/j.prosdent.2016.02.014.
|
| ［8］ |
郑梓婷，闫文娟.椅旁CAD/CAM 可切削材料相关性能的研究进展［J］.口腔材料器械杂志，2019，28（3）：46-51.DOI：10.11752/j.kqcl.2019.03.09.
|
| ［9］ |
孙瑞瞳，李享宜，胡一淳，等.硅基陶瓷的临床应用现状与展望［J/OL］.中华口腔医学研究杂志（电子版），2021，15（2）：72-78.DOI：10.3877/cma.j.issn.1674-1366.2021.02.002.
|
| ［10］ |
Ikemoto S，Nagamatsu Y，Masaki C，et al.Development of zirconia-based polymer-infiltrated ceramic network for dental restorative material［J］.J Mech Behav Biomed Mater，2024，150：106320.DOI：10.1016/j.jmbbm.2023.106320.
|
| ［11］ |
Li WY，Sun J.Effects of ceramic density and sintering temperature on the mechanical properties of a novel polymerinfiltrated ceramic-network zirconia dental restorative（filling）material［J］.Med Sci Monitor，2018，24：3068-3076.DOI：10.12659/MSM.907097.
|
| ［12］ |
Ikeda H，Nagamatsu Y，Shimizu H.Preparation of silica-poly（methyl methacrylate）composite with a nanoscale dual-network structure and hardness comparable to human enamel［J］.Dent Mater，2019，35（6）：893-899.DOI：10.1016/j.dental.2019.03.006.
|
| ［13］ |
Maryamnegari SM，Nateghi MR，Mohebat R.Effect of sintering and infiltration conditions on nanoscale dual network SiO2/polymethyl metacrylate composites mimicking human enamel［J］.J Dent，2022，126：104311.DOI：10.1016/j.jdent.2022.104311.
|
| ［14］ |
胡雨欣，吕广超，马骁，等.牙科树脂渗透陶瓷复合材料制备的研究进展［J］.国际口腔医学杂志，2025，52（1）：133-140.DOI：10.7518/gjkq.2025012.
|
| ［15］ |
Peskersoy C，Sahan HM.Finite element analysis and nanomechanical properties of composite and ceramic dental onlays［J］.Comput Methods Biomech Biomed Engin，2022，25（14）：1649-1661.DOI：10.1080/10255842.2022.2032004.
|
| ［16］ |
Jansen JU，Lümkemann N，Sener B，et al.Comparison of fracture toughness measurements for zirconia materials using two test methods［J］.Dent Mater J，2019，38（5）：806-812.DOI：10.4012/dmj.2018-361.
|
| ［17］ |
Maleki M，Sheikh-Al-Eslamian SM，Hasani E，et al.Comparative study on the microstructure and mechanical behavior of monolithic ceramic and laminated composite of high strength 3YTZP and high fracture toughness 12Ce-TZP［J］.J Alloy Compd，2019，776：166-171.DOI：10.1016/j.jallcom.2018.10.255.
|
| ［18］ |
Zang ST，He NX，Sun XT，et al.Influence of additives on the purity of tetragonal phase and grain size of ceria - stabilized tetragonal zirconia polycrystals（Ce-TZP）［J］.Ceram Int，2019，45：394-400.DOI：10.1016/j.ceramint.2018.09.179.
|
| ［19］ |
Shahmiri R，Standard OC，Hart JN，et al.Optical properties of zirconia ceramics for esthetic dental restorations：A systematic review［J］.J Prosthet Dent，2018，119（1）：36-46.DOI：10.1016/j.prosdent.2017.07.009.
|
| ［20］ |
Mohammed NY，Wahsh MM，Motawea IT，et al.Fabrication and characterization of polymer-infiltrated ceramic network materials based on nano-tetragonal zirconia［J］.J Korean Ceram Soc，2021，58：359-372.DOI：10.1007/s43207-020-00102-4.
|
| ［21］ |
Zhawi HE，Kaizer MR，Chughtai A，et al.Polymer infiltrated ceramic network structures for resistance to fatigue fracture and wear［J］.Dent Mater，2016，32（11）：1352-1361.DOI：10.1016/j.dental.2016.08.216.
|
| ［22］ |
Oudkerk J，Sanchez C，Grenade C，et al.The One-step No-prep technique for non-invasive full-mouth rehabilitation of worn dentition using PICN CAD-CAM restorations：Up to 9-year results from a prospective and retrospective clinical study［J］.Dent Mater，2025，41（4）：414-424.DOI：10.1016/j.dental.2024.12.016.
|
| ［23］ |
Song XF，Kang N，Yin L.Effect of bur selection on machining damage mechanisms of polymer infiltrated ceramic network material for CAD/CAM dental restorations［J］.Ceram Int，2020，46（14）：23116-23126.DOI：10.1016/j.ceramint.2020.06.089.
|
| ［24］ |
Tokunaga J，Ikeda H，Nagamatsu Y，et al.Castable polymerinfiltrated ceramic network composite for training model tooth with compatible machinability to human enamel［J］.Dent Mater J，2022，41（4）：520-526.DOI：10.4012/dmj.2021-299.
|
| ［25］ |
Tokunaga J，Ikeda H，Nagamatsu Y，et al.Wear of polymerinfiltrated ceramic network materials against enamel ［J］.Materials，2022，15（7）：1-13.DOI：10.3390/ma15072435.
|
| ［26］ |
Alves MFRP，de Campos LQB，Simba BG，et al.Microstructural characteristics of 3Y - TZP ceramics and their effects on the flexural strength［J］.Ceramics，2022，5（4）：798-813.DOI：10.3390/ceramics5040058.
|
| ［27］ |
Wille S，Möller R，Kern M.Influence of shading on zirconia′s phase transformation and flexural strength after artificial aging［J］.Dent Mater，2023，39（8）：702-707.DOI：10.1016/j.dental.2023.06.005.
|
| ［28］ |
Gautam C，Joyner J，Gautam A，et al.Zirconia based dental ceramics：Structure，mechanical properties，biocompatibility and applications［J］.Dalton T，2016，45（48）：19194-19215.DOI：10.1039/c6dt03484e.
|
| ［29］ |
Li K，Kou HM，Rao JC，et al.Fabrication of enamel-like structure on polymer-infiltrated zirconia ceramics［J］.Dent Mater，2021，37（4）：e245-e255.DOI：10.1016/j.dental.2021.01.002.
|
| ［30］ |
Shirani M，Savabi O，Mosharraf R，et al.Comparison of translucency and opalescence among different dental monolithic ceramics［J］.J Prosthet Dent，2021，126（3）：446.e1-446.e6.DOI：10.1016/j.prosdent.2021.04.030.
|
| ［31］ |
Ruiz-López J，Espinar C，Lucena C，et al.Effect of thickness on color and translucency of a multi-color polymer-infiltrated ceramicnetwork material［J］.J Esthet Restor Dent，2023，35（2）：381-389.DOI：10.1111/jerd.12952.
|
| ［32］ |
Emamia N，Sjödahl M，Söderholm KM.How filler properties，filler fraction，sample thickness and light source affect light attenuation in particulate filled resin composites ［J］.Dent Mater，2005，21（8）：721-730.DOI：10.1016/j.dental.2005.01.002.
|
| ［33］ |
Pulgar R，Lucena C，Espinar C，et al.Optical and colorimetric evaluation of a multi-color polymer-infiltrated ceramic-network material［J］.Dent Mater，2019，35（7）：e131-e139.DOI：10.1016/j.dental.2019.03.010.
|
| ［34］ |
Amri MD，Labban N，Alhijji S，et al. In vitro evaluation of translucency and color stability of CAD/CAM polymer-infiltrated ceramic materials after accelerated aging［J］.J Prosthodont，2021，30（4）：318-328.DOI：10.1111/jopr.13239.
|
| ［35］ |
Sulaiman TA，Suliman AA，Mohamed EA，et al.Optical properties of bisacryl-，composite-，ceramic- resin restorative materials：An aging simulation study［J］.J Esthet Restor Dent，2021，33（6）：913-918.DOI：10.1111/jerd.12653.
|
| ［36］ |
Acar O，Yilmaz B，Altintas SH，et al.Color stainability of CAD/CAM and nanocomposite resin materials［J］.J Prosthet Dent，2016，115（1）：71-75.DOI：10.1016/j.prosdent.2015.06.014.
|
| ［37］ |
Dos Santos DM，da Silva EVF，Watanabe D，et al.Effect of different acidic solutions on the optical behavior of lithium disilicate ceramics［J］.J Prosthet，2017，118（3）：430-436.DOI：10.1016/j.prosdent.2016.10.023.
|
| ［38］ |
Sen N，Us YO.Mechanical and optical properties of monolithic CAD-CAM restorative materials［J］.J Prosthet Dent，2018，119（4）：593-599.DOI：10.1016/j.prosdent.2017.06.012.
|
| ［39］ |
Lee JH，Kim SH，Yoon HI，et al.Colour stability and surface properties of high-translucency restorative materials for digital dentistry after simulated oral rinsing［J］.Eur J Oral Sci，2020，128（2）：170-180.DOI：10.1111/eos.12676.
|
| ［40］ |
Kilinc H，Turgut S.Optical behaviors of esthetic CAD-CAM restorations after different surface finishing and polishing procedures and UV aging：An in vitro study［J］.J Prosthet Dent，2018，120（1）：107-113.DOI：10.1016/j.prosdent.2017.09.019.
|
| ［41］ |
Choi YS，Kang KH，Att W.Evaluation of the response of esthetic restorative materials to ultraviolet aging［J］.J Prosthet Dent，2021，126（5）：679-685.DOI：10.1016/j.prosdent.2020.09.007.
|
| ［42］ |
Tassin M，Bonte E，Loison-Robert LS，et al.Effects of hightemperature - pressure polymerized resin - infiltrated ceramic networks on oral stem cells［J］.Plos One，2016，11（5）：e0155450.DOI：10.1371/journal.pone.0155450.
|
| ［43］ |
Pomès B，Behin P，Jordan L，et al.Influence of polymerization pressure and post - cure treatment on conversion degree and viscoelastic properties of polymer infiltrated ceramic network［J］.J Mech Behav of Biomed，2021，115：104286.DOI：10.1016/j.jmbbm.2020.104286.
|
| ［44］ |
Puspitasari R，Irnawati D，Widjijono.The effect of zinc oxide（ZnO）nanoparticle concentration on the adhesion of mucin and streptococcus mutans to heat-cured acrylic resin［J］.Dent Mater J，2023，42（6）：791-799.DOI：10.4012/dmj.2023-016.
|
| ［45］ |
Tang FL，Li JL，Xie WH，et al.Bioactive glass promotes the barrier functional behaviors of keratinocytes and improves the Reepithelialization in wound healing in diabetic rats［J］.Bioact Mater，2021，6（10）：3496-3506.DOI：10.1016/j.bioactmat.2021.02.041.
|
| ［46］ |
Chen YY，Sun C，Cao JF，et al.Mechanical properties and in vitro biocompatibility of hybrid polymer-HA/BAG ceramic dental materials［J］.Polymers，2022，14（18）：3774.DOI：10.3390/polym14183774.
|
| ［47］ |
Cui BC，Zhang RR，Sun FB，et al.Mechanical and biocompatible properties of polymer-infiltrated-ceramic-network materials for dental restoration［J］.J Adv Ceram，2020，9（1）：123-128.DOI：10.1007/s40145-019-0341-5.
|
| ［48］ |
Sismanoglu S，Gurcan AT，Yildirim-Bilmez Z，et al.Mechanical properties and repair bond strength of polymer-based CAD/CAM restorative materials［J］.Int J Appl Ceram Technol，2021，18：312-318.DOI：10.1111/ijac.13653.
|
| ［49］ |
Yano HT，Ikeda H，Nagamatsu Y，et al.Effects of alumina airborne-particle abrasion on the surface properties of CAD/CAM composites and bond strength to resin cement［J］.Dent Mater J，2021，40（2）：431-438.DOI：10.4012/dmj.2020-023.
|
| ［50］ |
Wanderico CM，Picolo MZ，Kury M，et al.Alternative surface treatments strategies for bonding to CAD/CAM resin - matrix ceramics［J］.J Adhes Sci Technol，2022，37（8）：1471-1484.DOI：10.1080/01694243.2022.2079333.
|
| ［51］ |
Tuncer B，Aktas G，Baris Guncu M，et al.Effects of surface treatments and cement type on shear bond strength between titanium alloy and All-Ceramic materials［J］.Materials，2023，16（18）：86240.DOI：10.3390/ma16186240.
|
| ［52］ |
Eldafrawy M，Greimers L，Bekaert S，et al.Silane influence on bonding to CAD - CAM composites：An interfacial fracture toughness study［J］.Dent Mater，2019，35（9）：1279-1290.DOI：10.1016/j.dental.2019.05.019.
|
| ［53］ |
Komagata Y，Nagamatsu Y，Ikeda H.Comparative bonding analysis of computer-aided design/computer-aided manufacturing dental resin Composites with various resin cements［J］.J Compos Sci，2023，7（10）：1-11.DOI：10.3390/jcs7100418.
|
| ［54］ |
Bello YD，Di Domenico MB，Magro LD，et al.Bond strength between composite repair and polymer - infiltrated ceramic -network material：Effect of different surface treatments［J］.J Esthet Restor Dent，2019，31（3）：275-279.DOI：10.1111/jerd.12445.
|
| ［55］ |
王淑君，张楚晗，唐一阳，等.自粘接树脂水门汀的临床应用及展望［J/OL］.中华口腔医学研究杂志（电子版），2024，18（4）：276-286.DOI：10.3877/cma.j.issn.1674-1366.2024.04.010.
|
| ［56］ |
David-Pérez M，Ramírez-Suárez JP，Latorre-Correa F，et al.Degree of conversion of resin-cements（light-cured/dual-cured）under different thicknesses of vitreous ceramics：Systematic review［J］.J Prosthodont Res，2022，66（3）：385-394.DOI：10.2186/jpr.JPR_D_20_00090.
|
| ［57］ |
Spitznagel FA，Röhrig S，Langner R，et al.Failure load and fatigue behavior of monolithic translucent zirconia，PICN and rapid-layer posterior single crowns on zirconia implants［J］.Matrials（Basel），2021，14（8）：1990.DOI：10.3390/ma14081990.
|
| ［58］ |
Rosentritt M，Krifka S，Preis V，et al.Dynamic fatigue of composite CAD/CAM materials［J］.J Mech Behav Biomed，2019，98：311-316.DOI：10.1016/j.jmbbm.2019.07.002.
|
| ［59］ |
Coldea A，Fischer J，Swain MV，et al.Damage tolerance of indirect restorative materials（including PICN）after simulated bur adjustments［J］.Dent Mater，2015，31（6）：684-694.DOI：10.1016/j.dental.2015.03.007.
|
| ［60］ |
Elraggal A，Afifi RR，Alamoush RA，et al.Effect of acidic media on flexural strength and fatigue of CAD - CAM dental materials［J］.Dent Mater，2023，39（1）：57-69.DOI：10.1016/j.dental.2022.11.019.
|
| ［61］ |
Turker I，Kursoglu P.Effects of thermal ageing on the mechanical properties of cad-cam ceramic materials［J］.Ceramcs-Silikáty，2023，67（4）：496-504.DOI：10.13168/cs.2023.0049.
|
| ［62］ |
Turgut S，Kılınç H，Bağış B.Effect of UV aging on translucency of currently used esthetic CAD-CAM materials［J］.J Esthet Restor Dent，2019，31（2）：147-152.DOI：10.1111/jerd.12460.
|