Application of 3D printing technology in maxillofacial repair

doi:10.3877/cma.j.issn.1674-1366.2015.03.015

Abstract

Abstract:

In accordance to patients′ demands, 3D printing and the corresponding computer aided Medical simulation technology can be used to rapidly fabricate biomedical materials which are suitable for individualized demands of different patients. Besides, using theses technologies can precisely control the microstructure of the materials to repair the damaged tissues or organs accurately, perform stimulative operations through the aids of computer software, improve the therapeutic methods and enhance the medical quality. Thus, these emerging technologies possess unique superiority in the application of the biomedical fields, especially in the development of biomedical materials and the biological tissue engineering technology. The literatures of recent advances in the application of 3D printing technology in Oral and Maxillofacial were reviewed to summarize the dynamic and progress.

Key words: 3D printing, Computer aided, Maxillofacial repair and reconstruction, Specific implant material

Junhui Huang, Gui Liu, Zhigang Yao, Hongbo Zhou, Yunli Huang, Jun Zuo, Kun Li, Changyu Yan. Application of 3D printing technology in maxillofacial repair[J]. Chinese Journal of Stomatological Research(Electronic Edition), 2015, 09(03): 252-255.

/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://zhkqyxyjzz.cma-cmc.com.cn/EN/10.3877/cma.j.issn.1674-1366.2015.03.015

https://zhkqyxyjzz.cma-cmc.com.cn/EN/Y2015/V09/I03/252

References 30

[1]	Derby B. Printing and prototyping of tissues and scaffolds[J]. Science，2012，338(6109):921-926.
[2]	Lethaus B, Poort L, Böckmann R，et al. Additive manufacturing for microvascular reconstruction of the mandible in 20 patients[J]. J Craniomaxillofac Surg，2012，40(1):43-46.
[3]	Salles F, Anchieta M, Costa Bezerra P，et al. Complete and isolated congenital aglossia：case report and treatment of sequelae using rapid prototyping models[J]. Oral Surg Oral Med Oral Pathol Oral Radiol Endod，2008，105(3):e41-e47.
[4]	Papaspyridakos P, Lal K. Complete arch implant rehabilitation using subtractive rapid prototyping and porcelain fused to zirconia prosthesis：a clinical report[J]. J Prosthet Dent，2008，100(3):165-172.
[5]	Liacouras P, Garnes J, Roman N，et al. Designing and manufacturing an auricular prosthesis using computed tomography，3-dimensional photographic imaging，and additive manufacturing：a clinical report[J]. J Prosthet Dent，2011，105(2):78-82.
[6]	Petzold R, Zeilhofer HF, Kalender WA. Rapid prototyping technology in medicine-basics and applications[J]. Comput Med Imaging Graph，1999，23(5):277-284.
[7]	Hurson C, Tansey A, O′Donnchadha B，et al. Rapid prototyping in the assessment，classification and preoperative planning of acetabular fractures[J]. Injury，2007，38(10):1158-1162.
[8]	Song ZL, Feng CK, Chiu FY，et al. The clinical significance of rapid prototyping technique in complex spinal deformity surgery-Case sharing and literature review[J]. Formosan Journal of Musculoskeletal Disorders，2013，4(3):88-93.
[9]	龚振宇，李国华，刘彦普，等.反求与快速成型技术在复杂颌面骨性病变修复中的应用[J].疑难病杂志，2011，10(10):767-770.
[10]	王太玲.个体化钛修复体修复下颌角缺损的实验研究[D].北京：中国协和医科大学，2009.
[11]	Singare S, Dichen L, Bingheng L，et al. Design and fabrication of custom mandible titanium tray based on rapid prototyping[J]. Med Eng Phys，2004，26(8):671-676.
[12]	Waran V, Menon R, Pancharatnam D，et al. The creation and verification of cranial models using three-dimensional rapid prototyping technology in field of transnasal sphenoid endoscopy[J]. Am J Rhinol Allergy，2012，26(5):132-136.
[13]	Lee SJ, Lee HP, Tse KM，et al. Computer-aided design and rapid prototyping-assisted contouring of costal cartilage graft for facial reconstructive surgery[J]. Craniomaxillofacial Trauma Reconstr，2012，5(2):75-82.
[14]	董青山，郭家平，李志进，等.基于快速成型技术即刻精确修复下颌骨缺损的临床研究[J].口腔医学研究，2012，28(11):1134-1137.
[15]	何三虎，李刚，李兴强，等.上颌骨肿瘤术后大型缺损的快速成型技术个体化修复[J].现代肿瘤医学，2006，14(1):15-18.
[16]	王绍义，蒋欣泉，张志愿.快速成形术在下颌骨缺损修复中的应用进展[J].中国口腔颌面外科杂志，2007，5(5):381-385.
[17]	Liao SH, Liu SJ, Zou BJ，et al. Automatic tooth segmentation of dental mesh based on harmonic fields[J/OL]. Hindawi Publishing Corporation BioMed Research International，2014:1-10. URL
[18]	王众.无所不能的3D打印[J].世界博览，2012(19):48-51.
[19]	Cecchini MP, Parnigotto M, Merigo F，et a1. 3D printing of rat salivary glands：the submandibular-sublingual complex[J]. Anat Histol Embryol，2014，43(3):239-244.
[20]	Al Mardini M, Ercoli C, Graser GN. A technique to produce a mirror-image wax pattern of an ear using rapid prototyping technology[J]. J Prosthet Dent，2005，94(2):195-198.
[21]	熊耀阳，陈晓波，焦婷，等.快速成型技术在鼻赝复体制作过程中的应用[J].上海交通大学学报（医学版），2008，28(4):417-419,430.
[22]	周冰，赵铱民，吴国锋，等.选区激光烧结成型技术在鼻赝复体制作中的应用[J].中国激光，2008，35(10):1644-1648.
[23]	李风兰，赵铱民.选择性激光烧结法烧结复合蜡粉制作耳赝复体[J].中国激光，2009，36(10):2712-2716.
[24]	潘景光，赵铱民，苏方.单侧眶缺损的三维仿真设计与快速制作[J].中国组织工程研究与临床康复，2009，13(43):8496-8498.
[25]	Feng Z, Dong Y, Zhao Y，et al. Computer-assisted technique for the design and manufacture of realistic facial prostheses[J]. Br J Oral Maxillofac Surg，2010，48(2):105-109.
[26]	陈扬，蓝涛，钱文斌. 3D打印技术在修复骨缺损中的应用研究[J].生物骨科材料与临床研究，2014，11(1):29-30.
[27]	余丹，刘建华，朱慧勇，等. 3-D打印技术在颌面骨缺损修复重建的应用[J].中国修复重建外科杂志，2014，28(3):292-295.
[28]	阮建明，叶雷，谢健全，等.医用金属植入材料多孔铌及其制备方法：中国，CN102258805A[P]. 2011-11-30.
[29]	Meseguer-Olmo L, Vicente-Ortega V, Alcaraz-Baños M. In-vivo behavior of Si-hydroxyapatite/polycaprolactone/DMB scaffolds fabricated by 3D printing[J]. J Biomed Mater Res A，2013，101(7):2038-2048.
[30]	Melchels FPW, Domingos MAN, Klein TJ，et al. Additive manufacturing of tissues and organs[J]. Progress in Polymer Science，2012(37):1079-1104.

Please choose a citation manager

Content to export