Research progress of holographic interferometry in oral biomechanics

doi:10.3877/cma.j.issn.1674-1366.2018.03.011

Abstract

Abstract:

Holographic interferometry is sensitive to micro-displacement, and it can be used to measure the surface changes of an object in a non-contact and visual way. The interference fringes generated through the coherence of holographic images are used to measure the vibration and deformation of the object. With the continuous development of digital holography, the digitized holographic interferometry can be utilized to obtain a qualitative and quantitative analysis on the displacement and deformation, which improves the measurement accuracy and has important guidance on the analysis of surface mechanical changes. Holographic interferometry has some research basis in dentistry, which is mainly used to measure and analyze the deformation of teeth and the surrounding bone, the transmission and dissipation of forces, and the changes in the stability of restorations and implants. The research progress of holographic interferometry in the field of oral biomechanics is reviewed in this article.

Key words: Holography, Interferometry, Oral medicine, Biomechanics

Ruohan Li, Youjian Peng. Research progress of holographic interferometry in oral biomechanics[J]. Chinese Journal of Stomatological Research(Electronic Edition), 2018, 12(03): 195-199.

/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://zhkqyxyjzz.cma-cmc.com.cn/EN/10.3877/cma.j.issn.1674-1366.2018.03.011

https://zhkqyxyjzz.cma-cmc.com.cn/EN/Y2018/V12/I03/195

References 30

[1]	Gabor D. A new microscopic principle[J]. Nature，1948，161（4098）：777.
[2]	Voevodkina TG，Ivanova LE，Kozinets GI. Holographic interfer-ometry[J]. Lab Delo，1985，5（7）：444-445.
[3]	Goodman JW，Lawrence RW. Digital Image Formation From Electronically Detected Holograms[J]. Applied Physics Letters，1967，11（3）：77-79.
[4]	Javidi B，Tajahuerce E. Three-dimensional object recognition by use of digital holography[J]. Opt Lett，2000，25（9）：610-612.
[5]	Eick JD，Welch FH. Polymerization shrinkage of posterior composite resins and its possible influence on postoperative sensitivity[J]. Quintessence Int，1986，17（2）：103-111.
[6]	Versluis A，Tantbirojn D，Pintado MR，et al. Residual shrinkage stress distributions in molars after composite restoration[J]. Dent Mater，2004，20（6）：554-564.
[7]	Pantelić D，Blazić L，Savić-Šević S，et al. Holographic detection of a tooth structure deformation after dental filling polymerization[J]. J Biomed Opt，2007，12（2）：24026.
[8]	Pantelić D，Blažić L，Savić-Šević S，et al. Real-time measure-ment of internal stress of dental tissue using holography[J]. Opt Express，2007，15（11）：6823-6830.
[9]	Chen TY，Chang GL，Wu SH. Holographic evaluation of the mar-ginal fit of complete crowns loaded at central fossa[J]. Proceed-ings of SPIE-The International Society for Optical Engineering，1993，1880（5）：1364-1368.
[10]	周玭.激光全息干涉计量术测量触点对单端固定桥位移的影响[D].成都：四川大学，2007.
[11]	Chorres JE，Uono C，Gioso MA，et al. Qualitative analysis of stress distribution in tooth-implant and implant-supported prosthesis by means of holography interferometry method[J]. RPG rev. pos-grad，2005，12（4）：412-416.
[12]	杜莉，高家业，林映荷，等.垂直静载下颊侧短固位臂美学卡环义齿基牙及鞍基位移的激光全息计量分析比较[J].临床口腔医学杂志，2002，18（2）：128-130.
[13]	Pezzoli M，Appendino P，Calcagno L，et al. Load transmission evaluation by removable distal-extension partial dentures using holographic interferometry[J]. J Dent，1993，21（5）：312-316.
[14]	彭琬，陈华，欧阳官，等.上颌双侧游离端活动义齿连接体的激光全息应力分析[J].华西口腔医学杂志，1989，7（2）：65-68.
[15]	彭琬，欧阳官，刘大文，等.上颌全口义齿连接体的激光全息应力分析研究[J].生物医学工程学杂志，1995，12（3）：201-204.
[16]	Dermaut LR，Beerden L. The effects of class Ⅱ elastic force on a dry skull measured by holographic interferometry[J]. Am J Orthod，1981，79（3）：296-304.
[17]	Kragt G，Duterloo HS. The initial effects of orthopedic forces：a study of alterations in the craniofacial complex of a macerated human skull owing to high-pull headgear traction[J]. Am J Orthod，1982，81（1）：57-64.
[18]	Duterloo HS，Kragt G，Algra AM. Holographic and cephalometric study of the relationship between craniofacial morphology and the initial reactions to high-pull headgear traction[J]. Am J Orthod，1985，88（4）：297-302.
[19]	Pavlin D，Vukicevic D. Mechanical reactions of facial skeleton to maxillary expansion determined by laser holography[J]. Am J Orthod，1984，85（6）：498-507.
[20]	Braun S，Bottrel JA，Lee KG，et al. The biomechanics of rapid maxillary sutural expansion[J]. Am J Orthod Dentofacial Orthop，2000，118（3）：257-261.
[21]	Wahl G，Lang H. Deformation at the implant interface to prosthetic superstructure：an interferometric approach[J]. Clin Oral Implants Res，2004，15（2）：233-238.
[22]	Scarano A，Assenza B，Piattelli M，et al. A 16-year study of the microgap between 272 human titanium implants and their abutments[J]. J Oral Implantol，2005，31（6）：269-275.
[23]	Matsumoto T，Tamamura K，Sugimura T，et al. Holographic measurement on deformation of mandible with dental implants due to occlusion[J]. Proceedings of SPIE-The International Society for Optical Engineering，1996（177）：177-183.
[24]	Brozović J，Demoli N，Farkaš N，et al. Properties of axially loaded implant-abutment assemblies using digital holographic interferometry analysis[J]. Dent Mater，2014，30（3）：e17-e27.
[25]	Caroena G，Mori M，Gesualdi MR，et al. Mastication effort study using photorefractive holographic interferometry technique[J]. J Biomech，2010，43（4）：680-686.
[26]	Gesualdi MR，Mori M，Muramatsu M，et al. Phase-shifting real-time holographic interferometry applied to load transmission evaluation in dried human skull[J]. Appl Opt，2007，46（22）：5419-5429.
[27]	Pantelić DV，Grujić DŽ，Vasiljević DM. Single-beam，dual-view digital holographic interferometry for biomechanical strain measurements of biological objects[J]. J Biomed Opt，2014，19（12）：127005.
[28]	Kostencka J，Kozacki T，Kuś A，et al. Holographic tomography with scanning of illumination：space-domain reconstruction for spatially invariant accuracy[J]. Biomed Opt Express，2016，7（10）：4086-4101.
[29]	Marquet P，Rappaz B，Magistretti PJ，et al. Digital holographic microscopy：a noninvasive contrast imaging technique allowing quantitative visualization of living cells with subwavelength axial accuracy[J]. Opt Lett，2005，30（5）：468-470.
[30]	Rawat S，Komatsu S，Markman A，et al. Compact and field-portable 3D printed shearing digital holographic microscope for automated cell identification[J]. Appl Opt，2017，56（9）：D127-D133.

Please choose a citation manager

Content to export