切换至 "中华医学电子期刊资源库"
高级检索
中华口腔医学研究杂志(电子版)

中华口腔医学研究杂志(电子版) ›› 2020, Vol. 14 ›› Issue (04) : 265 -270. doi: 10.3877/cma.j.issn.1674-1366.2020.04.012

所属专题： 口腔医学； 文献；

综述

聚芳醚酮的口腔临床应用及其产品化研究进展
谷德奥1, 陆伟1,†()   
  1. 1. 南京大学医学院附属口腔医院，南京市口腔医院口腔修复科　210008
  • 收稿日期:2020-02-12 出版日期:2020-08-01
  • 通信作者: 陆伟

Research progress on oral clinical application and stock devices of Polyaryletheretherketone

Deao Gu1, Wei Lu1,†()   

  1. 1. Department of Prosthodontics, Nanjing Stomatological Hospital, Medical School of Nanjing University, Nanjing 210008, China
  • Received:2020-02-12 Published:2020-08-01
  • Corresponding author: Wei Lu
  • About author:
    Corresponding author: Lu Wei, Email:
  • Supported by:
    Science and Technology Planning Project of Jiangsu Province(BE2019622); Science and Technology Innovation Project for Nanjing Overseas Students(2019169)
全文 ( ) 下载PDF ( ) 导出引用
引用本文：

谷德奥, 陆伟. 聚芳醚酮的口腔临床应用及其产品化研究进展[J]. 中华口腔医学研究杂志(电子版), 2020, 14(04): 265-270.

Deao Gu, Wei Lu. Research progress on oral clinical application and stock devices of Polyaryletheretherketone[J]. Chinese Journal of Stomatological Research(Electronic Edition), 2020, 14(04): 265-270.

聚芳醚酮（PAEK）家族及其复合材料良好的化学稳定性、生物学性能和接近天然牙以及密质骨的机械性能，使其在口腔修复、种植、正畸及颌面外科等临床领域得到了广泛的应用。随着对该类材料的不断研究，已有部分产品可直接应用于临床治疗。本文就PAEK家族材料在口腔领域的临床应用及产品化作一综述。

关键词: 聚芳醚酮, 聚醚醚酮, 聚醚酮酮, 口腔临床应用, 产品化/定制式产品

Polyaryletheretherketone (PAEK) family and its composites have excellent chemical stability, biological properties and its mechanicalproperties are very close to natural teeth and dense bone, which make it widely used in the field of oral prosthodontics, impantology, orthodontics, oral and maxillofacial surgery and so on. With the continuous research on this kind of materials, some products have been directly used in the clinical treatment. This article reviews the clinical application and custom devices of the family of PAEK materials in the field of stomatology.

Key words: Polyaryletheretherketone, Polyetheretherketone, Polyetherketoneketone, Oral Clinical Application, Stock/Custom Devices
表1 聚芳醚酮（PAEK）在口腔领域的应用现状
临床终端产品 存在形式 材料组成
临时种植基台 N/A，库存产品直接提供给临床医生 PEEK，PEEK+10% TiO2
暂时性垫 N/A，库存产品直接提供给临床医生 PEEK
长期植入骨内固定装置 N/A，库存产品直接提供给临床医生 植入级PEEK
种植支持式修复体的下部结构，冠桥及活动义齿 PEEK、PEKK颗粒或CAD/CAM盘 PEEK，PEEK+填充物，PEKK+填充物
可摘义齿 CAD/CAM盘 未定义的芳香酮
图1 不同厚度、不同颜色的聚醚醚酮（PEEK）盘
图2 上颌总义齿牙龈色腭板CAD/CAM铣削
[1]
孙方方，景建龙，吴国峰.数字化铣削技术制作聚醚酮酮口腔修复体的初步临床报告[J].实用口腔医学杂志，2019，35(6):908-912.
[2]
郭芳，黄硕，朱勇，等. 3种不同工艺制备聚醚醚酮假体的生物力学性能研究[J].口腔医学研究，2019，35(4):405-408. DOI：10.13701/j.cnki.kqyxyj.2019.04.024.
[3]
陆伟，李涤尘，吴国锋. 3D打印聚醚醚酮口腔修复体的初步临床报告[J].实用口腔医学杂志，2020，36(1):136-140.
[4]
Cortés LQ，Caussé N，Dantras E，et al. Morphology and dynamical mechanical properties of poly ether ketone ketone（PEKK）with meta phenyl links[J]. J Appl Polym Sci，2016，133(19):43396. DOI：10.1002/APP.43396.
[5]
齐曼霖，周延民.聚醚酮酮的性能及其在口腔医学领域中的应用[J].口腔医学研究，2018，34(9):939-942. DOI：10.13701/j.cnki.kqyxyj.2018.09.005.
[6]
Yuan B，Cheng Q，Zhao R，et al. Comparison of osteointegration property between PEKK and PEEK：effects of surface structure and chemistry[J]. Biomaterials，2018，170:116-126. DOI：10.1016/j.biomaterials.2018.04.014.
[7]
Zok FW，Miserez A. Property maps for abrasion resistance of materials[J]. Acta Mater，2007，55(18):6365-6371. DOI：10.1016/j.actamat.2007.07.042.
[8]
Sinha N，Gupta N，Reddy KM，et al. Versatility of PEEK as a fixed partial denture framework[J]. J Indian Prosthodont Soc，2017，17(1):80-83. DOI：10.4103/0972-4052.197941.
[9]
Nazari V，Ghodsi S，Alikhasi M，et al. Fracture Strength of Three-Unit Implant Supported Fixed Partial Dentures with Excessive Crown Height Fabricated from Different Materials[J]. Dent （Tehran），2016，13(6):400-406.
[10]
Zoidis P，Bakiri E，Polyzois G. Using modified polyetheretherketone（PEEK）as an alternative material for endocrown restorations：A short-term clinical report[J]. J Prosthet Dent，2017，117(3):335-339. DOI：10.1016/j.prosdent.2016.08.009.
[11]
Elmougy A，Schiemann AM，Wood D，et al. Characterisation of machinable structuralpolymers in restorative dentistry[J]. Dental Materals，2018，34(10):1509-1517. DOI：10.1016/j.dental.2018.06.007.
[12]
Klur T，Hasan I，Ottersbach K，et al. PEKK-made indirect temporary crowns and bridges：a clinical pilot study[J]. Clin Oral Investig，2019，23(2):771-777. DOI：10.1007/s00784-018-2493-z.
[13]
Becker CM，Kaiser DA，Goldfogel MH. Evolution of removable partial denture design[J]. Prosthodont，1994，3(3):158-166. DOI：10.1111/j.1532-849X.1994.tb00147.x.
[14]
Schwitalla AD，Spintig T，Kallage I，et al. Flexural behavior of PEEK materials for dental application[J]. Dent Mater，2015，31(11):1377-1384. DOI：10.1016/j.dental.2015.08.151.
[15]
Wiesli MG，Özcan M. High-Performance Polymers and Their Potential Application as Medical and Oral Implant Materials：A Review[J]. Implant Dent，2015，24(4):448-457. DOI：10.1097/id.0000000000000285.
[16]
Zoidis P，Papathanasiou I，Polyzois G. The Use of a Modified Poly-Ether-Ether-Ketone（PEEK）as an Alternative Framework Material for Removable Dental Prostheses. A Clinical Report[J]. J Prosthodont，2016，25(7):580-584. DOI：10.1111/jopr.12325.
[17]
李欣欣，柳玉树，孙玉春，等.计算机辅助设计与制作一体化聚醚醚酮可摘局部义齿不同形态组件的适合性评价[J].北京大学学报（医学版），2019，51(2):335-339. DOI：10.19723/j.issn.1671-167X.2019.02.025.
[18]
金智文，韩建民，刘云松，等.聚醚醚酮制作可摘义齿人工牙耐磨性及硬度的研究[J].口腔颌面修复学杂志，2018，19(4):236-240. DOI：10.3969/j.issn.1009-3761.2018.04.011.
[19]
Wimmer T，Huffmann AMS，Eichberger M，et al. Two-body wear rate of PEEK，CAD/CAM resin composite and PMMA：Effect of specimen geometries，antagonist materials and test set-up configuration[J]. Dent Mater，2016，32(6):127-136. DOI：10.1016/j.dental.2016.03.005.
[20]
Lekholm U，Gunne J，Henry P，et al. Survival of the Brånemark implant in partially edentulous jaws：a 10-year prospective multicenter study[J]. Int J Oral Maxillofac Implants，1999，14(5):639-645. DOI：10.1046/j.1365-2591.1999.00254.x.
[21]
Dawson JH，Hyde B，Hurst M，et al. Polyetherketoneketone （PEKK），a framework material for complete fixed and removable dental prostheses：A clinical report[J]. J Prosthetic Dentistry，2018，119(6):867-872. DOI：10.1016/j.prosdent.2017.09.008.
[22]
Dubé C，Rompré PH，Manzini C，et al. Quantitative Polygraphic Controlled Study on Efficacy and Safety of Oral Splint Devices in Tooth-grinding Subjects[J]. J Dent Res，2004，83(5):398-403. DOI：10.1177/154405910408300509.
[23]
Bumann A，Lotzmann U. TMJ disorders and orofacial pain. The role of dentistry in a multidisciplinary approach（2002）[J]. European Journal of Orthodontics，2003，25(2):213-213. DOI：10.1093/ejo/25.2.213.
[24]
Benli M，Gümüş BE，Kahraman Y，et al. Surface roughness and wear behavior of occlusal splint materialsmade of contemporary and high-performance polymers[J]. Odontology，2020，108:240-250. DOI：10.1007/s10266-019-00463-1.
[25]
王时敏，李峥，王冠博，等.全程数字化夜磨牙保护垫的制作和初步应用[J].北京大学学报（医学版），2019，51(1):105-110. DOI：10.19723/j.issn.1671-167X.2019.01.019.
[26]
Ha SW，Kirch M，Birchler F，et al. Surface activation of polyetheretherketone（PEEK）and formation of calcium phosphate coatings by precipitation[J]. Journal of Materials Science：Materials in Medicine，1997，8(11):683-690. DOI：10.1023/A:1018535923173.
[27]
Kurtz SM，Devine JN. PEEK biomaterials in trauma，orthopedic，and spinal implants[J]. Biomaterials，2007，28(32):4845-4869. DOI：10.1016/j.biomaterials.2007.07.013
[28]
何光霁，张文云.聚醚醚酮在口腔修复学中的应用[J].口腔医学，2017，37(10):957-960. DOI：10.13591/j.cnki.kqyx.2017.10.023.
[29]
Costa-Palau S，Torrents-Nicolas J，Brufau-De Barberà M，et al. Use of polyetheretherketone in the fabrication of a maxillary obturator prosthesis：a clinical report[J]. J Prosthet Dent，2014，112(3):680-682. DOI：10.1016/j.prosdent.2013.10.026.
[30]
Schwitalla A，Müller W-D. PEEK Dental Implants：A Review of the Literature[J]. J Oral Implantol，2013，39(6):743-749. DOI：10.1563/AAID-JOI-D-11-00002.
[31]
Yurttutan ME，Keskin A. Evaluation of the effects of different sand particles that used in dental implant roughened for osseointegration[J]. Bmc Oral Health，2018，18(1):47. DOI：10.1186/s12903-018-0509-3.
[32]
Najeeb S，Zafar MS，Khurshid Z，et al. Applications of polyetheretherketone（PEEK）in oral implantology and prosthodontics[J]. Journal of Prosthodontic Research，2016，60(1):12-19. DOI：10.1016/j.jpor.2015.10.001.
[33]
Koch FP，Weng D，Kramer S，et al. Soft tissue healing at one-piece zirconia implants compared to titanium and PEEK implants of identical design：a histomorphometric study in the dog[J]. Int Periodontics Restorative Dent，2013，33(5):669-677. DOI：10.11607/prd.1043.
[34]
Buck E，Li H，Cerruti M. Surface Modification Strategies to Improve the Osseointegration of Poly（etheretherketone）and Its Composites[J]. Macromol Biosci，2020，20(2):e1900271. DOI：10.1002/mabi.201900271.
[35]
Xu X，Li Y，Wang L，et al. Triple-functional polyetheretherketone surface with enhanced bacteriostasis and anti-inflammatory and osseointegrative properties for implant application[J]. Biomaterials，2019，212:98-114. DOI：10.1016/j.biomaterials.2019.05.014.
[36]
Schwitalla AD，Abou-Emara M，Zimmermann T，et al. The applicability of PEEK-based abutment screws[J]. J Mech Behav Biomed Mater，2016，63:244-251. DOI：10.1016/j.jmbbm.2016.06.024.
[37]
Lindhe J，Meyle J，Group D of European Workshop on Periodontology. Peri-implant Diseases：Consensus Report of the Sixth European Workshop on Periodontology[J]. J Clin Periodontol，2008，35(8):282-285. DOI：10.1111/j.1600-051X.2008.01283.x.
[38]
Mombelli A，Müller N，Cionca N. The epidemiology of peri-implantitis[J]. Clin Oral Implants Res，2012，23(6):67-76. DOI：10.1111/j.1600-0501.2012.02541.x.
[39]
Tomasi C，Derks J. Clinical research of peri-implant diseases—Quality of reporting，case definitions and methods to study incidence，prevalence and risk factors of peri-implant diseases [J]. J Clin Periodontol，2012，39(12):207-223. DOI：10.1111/j.1600-051X.2011.01831.x.
[40]
Tada Y，Hayakawa T，Nakamura Y. Load-Deflection and Friction Properties of PEEK Wires as Alternative Orthodontic Wires[J]. Materials（Basel），2017，10(8):914-926. DOI：10.3390/ma10080914.
[41]
Sfondrini MF，Cacciafesta V，Maffia E，et al. Nickel release from new conventional stainless steel，recycled，and nickel-free orthodontic brackets：An in vitro study[J]. Am J Orthod Dentofacial Orthop，2010，137(6):809-815. DOI：10.1016/j.ajodo.2008.07.021.
[42]
Nieminen T，Kallela I，Wuolijoki E，et al. Amorphous and crystalline polyetheretherketone：Mechanical properties and tissue reactions during a 3-year follow-up[J]. J Biomed Mater Res A，2008，84(2):377-383. DOI：10.1002/jbm.a.31310.
[43]
Maekawa M，Kanno Z，Wada T，et al. Mechanical properties of orthodontic wires made of super engineering plastic[J]. Dent Mater J，2015，34(1):114-119. DOI：10.4012/dmj.2014-202.
[44]
Burrow SJ. Friction and resistance to sliding in orthodontics：a critical review[J]. Am J Orthod Dentofacial Orthop，2009，135(4):442-447. DOI：10.1016/j.ajodo.2008.09.023.
[45]
Shirakawa N，Iwata T，Miyake S，et al. Mechanical properties of orthodontic wires covered with a polyether ether ketone tube[J]. Angle Orthod，2018，88(4):442-449. DOI：10.2319/082417-572.1.
[46]
Heimer S，Schmidlin PR，Stawarczyk B. Discoloration of PMMA，composite，and PEEK[J]. Clin Oral Investig，2017，21(4):1191-1200. DOI：10.1007/s00784-016-1892-2.
[47]
秦胜男，贾慧，李英.聚醚醚酮在口腔临床中的应用现状[J].国际口腔医学杂志，2018，45(6):652-656. DOI：10.7518/gjkq.2018.06.006.
[48]
穆苍山，靳欢，金永健，等. 3D打印聚醚醚酮修补材料在颅骨缺损修补手术中的应用效果分析[J].航空航天医学杂志，2019，30(7):774-776. DOI：10.3969/j.issn.2095-1434.2019.07.002.
[49]
李劲松. 3D打印聚醚醚酮（PEEK）假体精确重建眶底缺损的疗效分析[C]//中华口腔医学会口腔颌面外科专业委员会.第十四次中国口腔颌面外科学术会议论文汇编，重庆，2018.北京：中华口腔医学会，2018：541-542.
[50]
Järvinen S，Suojanen J，Kormi E，et al. The use of patient specific polyetheretherketone implants for reconstruction of maxillofacial deformities[J]. J Craniomaxillofac Surg，2019，47(7):1072-1076. DOI：10.1016/j.jcms.2019.03.018.
[51]
Ierardo G，Luzzi V，Lesti M，et al. Peek polymer in orthodontics：A pilot study on children[J]. J Clin Exp Dent，2017，9(10):e1271-e1275. DOI：10.4317/jced.54010.
[52]
冀堃，朱顶贵，陆伟，等.聚醚酮酮数字化乳牙早失间隙保持器的临床应用观察[J/CD].中华口腔医学研究杂志（电子版），2019，13(6):368-372. DOI：10.3877/cma.j.issn.1674-1366.2019.06.008.
[53]
Siewert B，Plaza-Castro M，Sereno N，et al. Applications of PEEK in the Dental Field[M]//Steven Kurtz. PEEK Biomaterials Handbook. 2nd Edition. 2019. DOI：10.1016/B978-0-12-812524-3.00020-X.
[1] 庞菲菲, 刘俊杰, 于子航, 吴小婕, 张昕宇, 战德松, 付佳乐. 不同表面处理方式对聚醚醚酮与复合树脂粘接性能的影响[J]. 中华口腔医学研究杂志(电子版), 2022, 16(02): 74-81.
[2] 冀堃, 朱顶贵, 陆伟, 戴丽, 王欣然, 景建龙, 吴国锋. 聚醚酮酮数字化乳牙早失间隙保持器的临床应用观察[J]. 中华口腔医学研究杂志(电子版), 2019, 13(06): 368-372.
[3] 冷昭富, 汪永新. 儿童去骨瓣减压术后颅骨成形术的研究进展[J]. 中华神经创伤外科电子杂志, 2023, 09(05): 313-317.
[4] 刘冬, 图柯拜·吐尔托合提, 赵俊红, 汪永新, 吉文玉. 3D打印PEEK材料治疗儿童颅骨缺损的临床应用[J]. 中华神经创伤外科电子杂志, 2022, 08(02): 106-110.
[5] 吴水华, 陈朝晖, 范双石, 李浩, 王海阳. 个性化聚醚醚酮植入物在儿童颅骨修补术中的临床应用及分析[J]. 中华神经创伤外科电子杂志, 2021, 07(04): 252-255.
[6] 袁杰, 武孝刚, 王金标, 刘璐, 王春琳. 3D打印聚醚醚酮材料在颅脑损伤后颅骨成形术中的应用疗效分析[J]. 中华脑科疾病与康复杂志(电子版), 2022, 12(05): 274-278.
[7] 赵德枭, 郭永坤, 王新军, 刘婉清, 陈冠岐, 毛建超, 单峤. 聚醚醚酮与钛网修补颅骨缺损的临床应用对比分析[J]. 中华脑科疾病与康复杂志(电子版), 2021, 11(06): 362-365.
[8] 李明辉, 刘洋, 王彩民, 张觅, 许锋. 聚醚醚酮棒脊柱动态内固定系统在腰椎退行性疾病中的临床对比研究[J]. 中华临床医师杂志(电子版), 2019, 13(11): 850-854.
阅读次数
全文


摘要

版权所有 中华医学会 中华医学电子音像出版社有限责任公司  京ICP备14006079号-1  网络出版服务许可证：(署)网出证(京)字第075号